User`s manual

OPS860-HM User’s Manual
Connectors
36
3.1.8 RJ45 (WG82579LM) (LAN1)
The RJ-45 connector LAN1 is for Ethernet. To connect the board
to 100-Base-T or 1000-Base-T hub, just plug one end of the
cable into LAN1 and connect the other end (phone jack) to a
100-Base-T hub or 1000-Base-T hub.
Pin
Signal
12345678
A B
1
Tx+ (Data transmission positive)
2
Tx- (Data transmission negative)
3
Rx+(Data reception positive)
4
RJ-1(For 1000 base T-Only)
5
RJ-1(For 1000 base T-Only)
6
Rx- (Data reception negative)
7
RJ-1(For 1000 base T-Only)
8
RJ-1(For 1000 base T-Only)
A
Active LED
B
Speed LED
3.1.9 USB Port 0/1 (USB1)
Pin
Signal
1 2 3 4
1
USB_POWER
2
USB -
3
USB +
4
GND