User`s manual

iv
Safety Precautions
Before getting started, please read the following important
safety precautions.
1. The OPS860-HM does not come equipped with an operating
system. An operating system must be loaded first before
installing any software into the computer.
2. Be sure to ground yourself to prevent static charge when
installing the internal components. Use a grounding wrist strap
and place all electronic components in any static-shielded
devices. Most electronic components are sensitive to static
electrical charge.
3. Disconnect the power cord from the OPS860-HM before any
installation. Be sure both the system and external devices are
turned OFF. A sudden surge of power could ruin sensitive
components that the OPS860-HM must be properly grounded.
4. Make sure it is the correct voltage of the power source before
connecting the equipment to the power outlet.
5. The brightness of the flat panel display will be getting weaker as
a result of frequent usage. However, the operating period varies
depending on the application environment.
6. The flat panel display is not susceptible to shock or vibration.
When assembling the OPS860-HM, make sure it is securely
installed.
7. Do not leave this equipment in an uncontrolled environment
where the storage temperature is below 0℃ or above 40℃. It
may damage the equipment.
8. External equipment intended for connection to signal input/out or
other connectors shall comply with relevant UL/IEC standard.