User`s manual

NA-821 Series Network Appliance User’s Manual
AMT Settings
80
4. Select Provision Model to Change TO INTEL AMT 1.0 (Y/N), and
set it to ‘N’; to Change TO Small Business (Y/N), and set it to ‘Y’.
5. Select SOL/IDE-R and set it to ‘Y’. Next, get into Username and
Password to set it to ‘Enabled’; into Serial-Over-LAN to set it to
‘Enabled’; and into IDE Redirection to set it to ‘Enabled’.
6. Select Secure firmware update, and set it to ‘Enabled’.