User`s manual

NA-821 Series Network Appliance User’s Manual
Hardware and Installation
15
2.3.3 WDT Jumper (JP7)
You may need to use this jumper to set WDT output function for SYS
Reset or LAN bypass.
Description Function Jumper Setting
WDT SYS Reset
JP7
WDT
WDT LAN Bypass
(Default)
JP7
2.3.4 ME Clear CMOS Jumper (JP8)
You may need to use this jumper to clear the ME CMOS memory if
incorrect settings in the Setup Utility.
Description Function Jumper Setting
Normal (Default)
JP8
ME Clear CMOS
ME Clear CMOS
JP8