User`s manual

NA-811 Series Network Appliance User’s Manual
Hardware Description
10
2.2 Memory Module (SODIMM)
The main board supports one SODIMM socket with maximum memory
capacity up to 2GB None-ECC unbuffer memory.
The following steps show you how to install the memory modules:
1 Push down each side of the SODIMM socket.
2 Align the memory module with the socket that notches of
memory module must match the socket keys for a correct
intallation.
3 Install the memory module into the socket and push it firmly
down until it is fully seated. The socket latches are levered
upwards and clipped on to the edges of the DIMM.
4 Install any remaining SODIMM modules.
Notice 1 When you are handling electrostatic discharge-sensitive
(ESDs), please take precautions to avoid any damage
from static electricity.
Notice 2 The memory can support DDRII 400/533.