User`s manual

NA-320 Series Network Appliance User’s Manual
AMI BIOS Setup Utility
47
 Serial port number
This item specifies the base I/O port address and Interrupt
Request address of serial port 1. The Optimal setting is
3F8/IRQ4.
 Serial Port Mode
This item allows you to setup the data transfer rate for the
console port. The default value is 115200. Available options
are “9600”, “19200”, “38400”, “57600” and “115200”.
 Flow Control
This item allows you to select flow control for console
redirection. The configuration options: None, Hardware and
Software.
 Redirection After BIOS POST
Use this item to enable or disable the function of Console
Redirection, which allows you maintain a system from a
remote location. The default setting is Always.
 Therminal Type
This item allows you to select the target therminal type.