User`s manual

ManualsBrandsAXIOMTEK ManualsMotherboardsNA-320 Series

NA-320 Series Network Appliance User’s Manual

Hardware Description

2.4 Jumper Settings

This section provides the information about jumpers and connectors of

NA-320 Series. Proper jumper settings configure the main board in this

appliance to meet your application purpose. We are herewith listing a

summary table of all jumpers and default settings for onboard devices,

respectively.

Jumper

Definition

Jumper

Settings

Function

JP1

TACT SW2

Selection

Short (1-2) Power On/Off

Short (3-4) Reset(Default)

Short (5-6) GPI

JP2/JP3

LAN By-Pass

Trigger 1/2

Short/Open

LAN5 & LAN6 Bypass Trigger 1

GPO Low Level (By Pass Enable)

Open/Short

LAN5 & LAN6 Bypass Trigger 2

GPO High Level (By Pass

Disable)(Default)

JP4

LAN By-Pass

Function

Short (1-2) LAN5 & LAN6 Bypass Always Disable

Short (2-3) LAN5 & LAN6 Bypass Always Enable

Open

LAN5 & LAN6 Bypass control by JP2 or

JP3 or WDT(appendix A)(Default)

JP5

Compact

Flash Power

Selection

Short (1-2) CF Voltage Select : 3.3V(Default)

Short (2-3) CF Voltage Select : 5V

JP6

Clear CMOS

Setting

Short (1-2) Normal(Default)

Short (2-3) Clear BIOS CMOS

JP7

Auto Power

Button Mode

Selection

Open Auto Power On (Default)

Short Power on By Power button