User`s manual

NA-320 Series Network Appliance User’s Manual
Hardware Description
18
2.2 Memory Module (SODIMM)
The main board supports one DDR2 667 SODIMM socket. Maximum
memory capacity is up to 2GB None-ECC unbuffer memory.
The following steps show you how to install the memory modules:
1 Push down each side of the SODIMM socket.
2 Align the memory module with the socket that notches of memory
module must match the socket keys for a correct installation.
3 Install the memory module into the socket and push it firmly down until it
is fully seated. The socket latches are levered upwards and clipped on to
the edges of the DIMM.
4 Install any remaining SODIMM modules.