User`s manual

NA-320 Series Network Appliance User’s Manual
Introduction
14
 Transmitted LED for LAN port #1, port#2, port#3,
port#4, port#5 and port#6
1. The double-color LED light indicates 10/100/1000Mbps
transfer rate.
`Transfer Rate LED Light Color
10Mbps Dark
100Mbps Green
1000Mbps Amber
2. When the amber-color LED light is radiating, it should
be 1000Mbps transfer rate at this moment.
3. When the green-color LED light is radiating, it should
be 100Mbps transfer rate at this moment
4. If the LED is dark and Link/Active LED is light on or
flashing, it should be 10Mbps transfer rate.
5. When this LED and Link/Active LED both are
dark. No networking devices are attached
 Console port – RJ RS-232 Console port is for the
command of line interface and of diagnostic support by
P.O.S.T (Power on Self Test).
 Reset Switch – It is is for reset the system to reboot your
computer instead of turning OFF the power switch. It is a
better way to reboot your system for a longer life of the
system’s power supply.
 Default Switch – The sample code will be provided that
allows users to define their own function. For example,
when the system has any problems, this switch can support
to reset it to the customer’s OS default settings if our
customer’s OS supports this application