User`s manual

MANO873 Series All-In-One Mini ITX Board
2 Introduction
1.2 Specifications
 CPU
 Intel
®
Core
TM
i7 desktop processor.
 Intel
®
Core
TM
i5 desktop processor.
 Intel
®
Core
TM
i3 desktop processor.
 Intel
®
Celeron
®
desktop processor.
 System Chipset
 Intel
®
Q77.
 CPU Socket
 LGA1155.
 DRAM Transfer Rate
 1333/1600MHz.
 BIOS
 AMI BIOS via SPI interface with socket.
 System Memory
 Two 204-pin unbuffered DDR3 SO-DIMM sockets.
 Maximum up to 16GB DDR3 1333/1600MHz memory with two SO-DIMMs using
8GB memory technology.
 Onboard Multi I/O
 Controller: Nuvoton NCT6627UD.
 Serial ports: Three RS-232 ports (COM2/3/4) and one RS-232/422/485 port (COM1).
 SATADOM (Optional)
 One SATADOM supported; co-layout with a SATA-300 socket (according to SATA
2.0 signal).
 Serial ATA
 Supports SATA 3.0 and SATA 2.0.
 Two SATA 3.0 ports (6Gb/s performance) with SATA RAID 0/1/5/10 by Q77 and two
SATA 2.0 ports (3Gb/s performance).
 USB Interface
 Four USB 3.0 ports with fuse protection (two USB 3.0 ports are from Renesas
uPD720202 (CN10); two USB 3.0 ports are from PCH (CN11).
 Four USB 2.0 ports with fuse protection.
 Display
 One VGA.
 One DVI-D.
Note: Due to Intel design limitation and BIOS default option, under DOS only VGA display
is supported.
Duo to USB3.0 form Renesas Upd720202 (CN10), it is useful during dos mode but
only work after driver be installed in OS, otherwise it will be malfunction.