User`s manual

MANO873 Series All-In-One Mini ITX Board
26 Hardware Installation
 Assemble LGA1155 socket protective cover:
1. Hold protective cover at 45 degree angle to the LGA1155 Socket.
2. Carefully lower protective cover on hinge side first, to contact with the outside wall of
the LGA1155 Socket:
3. Engage protective cover retention features to outside of LGA1155 Socket, AND align 2
cover corners to socket corners (This step is critical to avoid Bent Contact Damage!).
4. Lower protective cover to attach to the LGA1155 Socket on Shoulder screw side.
 Perform Visual and Tactile verification that protective cover is properly seated in the
LGA1155 Socket:
Hold cover and move gently “side by side” to feel the play within the cover and the
LGA1155 Socket.
 Close the socket load plate and engage the load lever (see image below).