MANO873 Series ® Intel Socket 1155 CoreTM i7 / CoreTM ® i5 / CoreTM i3 / Celeron Processor All-In-One Mini ITX Board with DVI-D / VGA User’s Manual
Disclaimers This manual has been carefully checked and believed to contain accurate information. Axiomtek Co., Ltd. assumes no responsibility for any infringements of patents or any third party’s rights, and any liability arising from such use. Axiomtek does not warrant or assume any legal liability or responsibility for the accuracy, completeness or usefulness of any information in this document. Axiomtek does not make any commitment to update the information in this manual.
ESD Precautions Computer boards have integrated circuits sensitive to static electricity. To prevent chipsets from electrostatic discharge damage, please take care of the following jobs with precautions: Do not remove boards or integrated circuits from their anti-static packaging until you are ready to install them. Before holding the board or integrated circuit, touch an unpainted portion of the system unit chassis for a few seconds. It discharges static electricity from your body.
Table of Contents Disclaimers ..................................................................................................... ii ESD Precautions ........................................................................................... iii Chapter 1 Introduction ............................................. 1 1.1 Features ............................................................................................... 1 1.2 Specifications ..........................................................
Chapter 4 Hardware Description ........................... 29 4.1 Microprocessors ............................................................................... 29 4.2 BIOS ................................................................................................... 29 4.3 System Memory ................................................................................. 29 4.4 I/O Port Address Map ........................................................................ 30 4.
This page is intentionally left blank.
MANO873 Series All-In-One Mini ITX Board Chapter 1 Introduction ® TM ® TM The MANO873 is a Mini ITX board with LGA1155 socket for Intel Core i7 / Intel Core i5 / ® TM ® ® Intel Core i3 / Intel Celeron (G6950) desktop processor with 22nm technology. The board ® integrates Intel Q77 chipset that delivers outstanding system performance through high-bandwidth interfaces, multiple I/O functions for interactive applications and various embedded computing solutions.
MANO873 Series All-In-One Mini ITX Board 1.2 Specifications CPU ® Intel ® Intel ® Intel ® Intel TM Core i7 desktop processor. TM Core i5 desktop processor. TM Core i3 desktop processor. Celeron® desktop processor. System Chipset ® Intel Q77. CPU Socket LGA1155. DRAM Transfer Rate 1333/1600MHz. BIOS AMI BIOS via SPI interface with socket. System Memory Two 204-pin unbuffered DDR3 SO-DIMM sockets.
MANO873 Series All-In-One Mini ITX Board Watchdog Timer 1~255 seconds; up to 256 levels. Expansion Interface One PCI-Express x16 slot. Ethernet ® LAN1 – Intel 82579LM supports 10/100/1000Mbps. ® LAN2 – Intel 82583V supports 10/100/1000Mbps. Audio HD audio compliant (with line/speaker-out and MIC-in) via ALC662. Internal audio feature for speaker-out via wafer connector. Power Management ACPI (Advanced Configuration and Power Interface). Form Factor Mini ITX form factor.
MANO873 Series All-In-One Mini ITX Board This page is intentionally left blank.
MANO873 Series All-In-One Mini ITX Board Chapter 2 Board and Pin Assignments 0.00 6.17 16.76 56.18 131.18 Board Dimensions and Fixing Holes 163.83 157.48 2.1 159.84 154.94 159.84 145.91 118.13 70.91 54.42 53.47 42.68 36.25 22.86 0.00 4.82 0.00 6.17 19.68 38.31 59.94 79.94 88.96 125.98 125.70 10.16 163.83 157.48 151.00 10.
MANO873 Series All-In-One Mini ITX Board 170.00 61.26 23.45 170.
MANO873 Series All-In-One Mini ITX Board 2.
MANO873 Series All-In-One Mini ITX Board Bottom Side 8 Board and Pin Assignments
MANO873 Series All-In-One Mini ITX Board 2.3 Jumper Settings Jumper is a small component consisting of jumper clip and jumper pins. Install jumper clip on 2 jumper pins to close. And remove jumper clip from 2 jumper pins to open. The following illustration shows how to set up jumper. Before applying power to MANO873 Series, please make sure all of the jumpers are in factory default position. Below you can find a summary table and onboard default settings.
MANO873 Series All-In-One Mini ITX Board 2.3.1 Restore BIOS Optimal Defaults (JP1) Put jumper clip to pin 2-3 for a few seconds then move it back to pin 1-2. Doing this procedure can restore BIOS optimal defaults. Function Setting Normal operation (Default) Restore BIOS optimal defaults 1-2 close 2-3 close 2.3.2 USB Port 4 and 5 Power Selection (JP4) Use JP4 for setting USB power signal on connector CN9 to standby or system power.
MANO873 Series All-In-One Mini ITX Board 2.3.6 COM1 RS-232/422/485 Mode Setting (JP11, JP12, JP14) Use these jumpers to set COM1 port to operate as RS-232, RS-422 or RS-485 communication mode. When these jumpers are set to operate as RS-422 or RS485 mode, please make sure COM1 is on data mode (see section 2.3.5) Function Setting RS-232 mode (Default) RS-422 mode RS-485 mode 2.3.
MANO873 Series All-In-One Mini ITX Board 2.4 Connectors Signals go to other parts of the system through connectors. Loose or improper connection might cause problems, please make sure all connectors are properly and firmly connected. Here is a summary table which shows all connectors on the hardware. Connector Description CN1 PCI-Express x16 Slot CN2 24-pin ATX Power Connector CN3 Serial ATA 2.0 Port 2 Connector CN4 Serial ATA 2.0 Port 3 Connector (Optional for SATADOM) CN8 USB 2.
MANO873 Series All-In-One Mini ITX Board 2.4.1 ATX Power Connectors (CN2 and ATX1) Steady and sufficient power can be supplied to all components on the board by connecting power connector. Please make sure all components and devices are properly installed before connecting the power connector. External power supply plug fits into this connector in only one orientation. Properly press down power supply plug until it completely and firmly fits into this connector.
MANO873 Series All-In-One Mini ITX Board 2.4.2 Serial ATA Connectors (CN3, CN4, SATA1 and SATA2) These Serial Advanced Technology Attachment (Serial ATA or SATA) connectors are for high-speed SATA interfaces. They are computer bus interfaces for connecting to devices such as hard disk drives. This board has two SATA 2.0 ports (CN3 and CN4) with 3Gb/s performance and two SATA 3.0 ports (SATA1 and SATA2) with 6Gb/s performance.
MANO873 Series All-In-One Mini ITX Board 2.4.3 USB Connectors (CN8 and CN9) The CN8 and CN9 are USB connectors carrying USB port 6 and 7 and USB port 4 and 5, respectively. They are for installing versatile USB 2.0 compliant interface peripherals. These connectors are designed with +5V level standby power which can provide power when system is in suspend mode. Note that the power signal on CN9 can also be set to system power (see section 2.3.2). Pin 1 3 5 7 9 2.4.
MANO873 Series All-In-One Mini ITX Board Pin L1 L2 L3 L4 A B Pin 1 2 3 4 5 6 7 8 9 LAN2 Signal (WG82583V) Pin MDI0+ L5 MDI0L6 MDI1+ L7 MDI1L8 100 LAN LED (Green)/ 1000 LAN LED (Orange) Active LED MDI2+ MDI2MDI3+ MDI3- USB Signal (from PCH) USB Signal (from PCH) USB_VCC (+5V level standby power) USB_Data0USB_Data0+ GND SSRX0SSRX0+ GND SSTX0SSTX0+ 2.4.
MANO873 Series All-In-One Mini ITX Board 2.4.6 HD Audio Jack (CN16) The board provides a HD audio jack on the rear I/O. Install audio driver, and then attach audio devices to CN16. Pin Color Signal Green Pink Line-out MIC-in 2.4.7 Internal Audio Connector (CN17) CN17 is an internal audio connector for line-out and microphone. Pin Signal 1 2 3 4 5 Lineout-L GND Lineout-R GND MIC-in 2.4.8 1 5 VGA and DVI-D Connector (CN19) The upper connector is a DB-15 which is commonly used for CRT monitor.
MANO873 Series All-In-One Mini ITX Board 2.4.9 PS/2 Keyboard and Mouse Connector (CN20) The board has two 6-pin mini-DIN PS/2 connectors; green for mouse and purple for keyboard. Pin Signal Pin Signal 1 2 3 4 5 6 K/B Data NC GND Standby power +5V K/B CLK NC 7 8 9 10 11 12 M/S Data NC GND Standby power +5V M/S CLK NC 2.4.
MANO873 Series All-In-One Mini ITX Board 2.4.11 FAN Connectors (FAN1 and FAN2) Fans are always needed for cooling down CPU and system temperature. The board has two fan connectors. You can find fan speed option(s) at BIOS Setup Utility if either fan is installed. For further information, see BIOS Setup Utility: Advanced\HW Monitor\PC Health Status. CPU fan interface is available through FAN1, see table below.
MANO873 Series All-In-One Mini ITX Board Power On/Off Button Pin 9 and 10 connect the power button on front panel to the CPU board, which allows users to turn on or off power supply. System Reset Switch Pin 11 and 12 connect the case-mounted reset switch that reboots your computer without turning off the power switch. It is a better way to reboot your system for a longer life of system power supply. HDD Activity LED This connection is linked to hard drive activity LED on the control panel.
MANO873 Series All-In-One Mini ITX Board Chapter 3 Hardware Installation ® Before installing the processor, please access Intel website for more detail information of Processor Integration Video (LGA1155): http://www.intel.com/support/tw/processors/sb/CS-030860.htm . 3.1 Installing the Processor The LGA1155 processor socket comes with a cover to protect the processor.
MANO873 Series All-In-One Mini ITX Board Note: Vertical removal is NOT recommended, as it requires higher force and can lead to socket contact damage. Caution: Never touch fragile socket contacts to avoid damage and do not touch processor sensitive contacts at any time during installation. Step3 Processor installation: Lift processor package from shipping media by grasping the substrate edges. Scan the processor package gold pads for any presence of foreign material.
MANO873 Series All-In-One Mini ITX Board Grasp the processor with thumb and index finger along the top and bottom edges. (Do not touch the orientation notches.) The socket will have cutouts for your fingers to fit into (see image below). Carefully place the processor into the socket body vertically (see image below). Note: Tilting or roughly shifting it into place can damage socket contacts. Caution: Do not use a vacuum pen for installation.
MANO873 Series All-In-One Mini ITX Board Verify that package is within the socket body and properly connected to orientation keys. Close the socket (see image below): 1. Gently lower the load plate. 2. Make sure load plate's front edge slides under the shoulder screw cap as the lever is lowered. 3. Latch the lever under the top plate's corner tab, being cautious not to damage the motherboard with the tip of the lever. Step4 Fan heatsink handling: 1.
MANO873 Series All-In-One Mini ITX Board 2. Screw the CPU cooling fan onto the board. 3. Make sure the CPU fan is plugged to the CPU fan connector. Step5 Removing the processor: Open the socket: 1. 2. Disengage the load lever. Open the load plate Remove the Processor package, holding along the top and bottom edges, or by using a vacuum pen. Maintain Processor horizontal and remove Processor with a vertical motion to avoid damaging the socket contacts.
MANO873 Series All-In-One Mini ITX Board Assemble LGA1155 socket protective cover: 1. 2. 3. 4. Hold protective cover at 45 degree angle to the LGA1155 Socket. Carefully lower protective cover on hinge side first, to contact with the outside wall of the LGA1155 Socket: Engage protective cover retention features to outside of LGA1155 Socket, AND align 2 cover corners to socket corners (This step is critical to avoid Bent Contact Damage!).
MANO873 Series All-In-One Mini ITX Board 3.2 Installing the Memory The board supports two 204-pin DDR3 SO-DIMM memory sockets with maximum memory capacity up to 16GB. Note: A DDR3 module has the same physical dimensions as a DDR2 SO-DIMM but is notched differently to prevent installation on a DDR2 SO-DIMM socket. Please follow steps below to install the memory modules: Push down latches on each side of the SO-DIMM socket.
MANO873 Series All-In-One Mini ITX Board This page is intentionally left blank.
MANO873 Series All-In-One Mini ITX Board Chapter 4 Hardware Description 4.1 Microprocessors ® TM TM TM ® The MANO873 Series supports Intel Core i7 / Core i5 / Core i3 / Celeron processors, ® ® which enable your system to operate under Windows XP, Windows 7 and Linux environments. The system performance depends on the microprocessor. Make sure all correct settings are arranged for your installed microprocessor to prevent the CPU from damages. 4.
MANO873 Series All-In-One Mini ITX Board 4.4 I/O Port Address Map ® TM TM TM ® The Intel Core i7 / Core i5 / Core i3 / Celeron processors communicate via I/O ports. Total 1KB port addresses are available for assigning to other devices via I/O expansion cards.
MANO873 Series All-In-One Mini ITX Board Hardware Description 31
MANO873 Series All-In-One Mini ITX Board 4.
MANO873 Series All-In-One Mini ITX Board Hardware Description 33
MANO873 Series All-In-One Mini ITX Board 34 Hardware Description
MANO873 Series All-In-One Mini ITX Board 4.
MANO873 Series All-In-One Mini ITX Board This page is intentionally left blank.
MANO873 Series All-In-One Mini ITX Board Chapter 5 AMI BIOS Setup Utility The AMI UEFI BIOS provides users with a built-in setup program to modify basic system configuration. All configured parameters are stored in a flash chip to save the setup information whenever the power is turned off. This chapter provides users with detailed description about how to set up basic system configuration through the AMI BIOS setup utility. 5.1 Starting To enter the setup screens, follow the steps below: 1. 2.
MANO873 Series All-In-One Mini ITX Board Hot Keys Description Left/Right The Left and Right keys allow you to select a setup screen. Up/Down The Up and Down keys allow you to select a setup screen or sub-screen. + Plus/Minus The Plus and Minus keys allow you to change the field value of a particular setup item. Tab The key allows you to select setup fields. F1 The key allows you to display the General Help screen.
MANO873 Series All-In-One Mini ITX Board System Date/Time Use this option to change the system time and date. Highlight System Time or System Date using the keys. Enter new values through the keyboard. Press the key or the keys to move between fields. The date must be entered in MM/DD/YY format. The time is entered in HH:MM:SS format. Access Level Display the access level of current user. 5.
MANO873 Series All-In-One Mini ITX Board ACPI Settings You can use this screen to select options for the ACPI configuration, and change the value of the selected option. A description of the selected item appears on the right side of the screen. ACPI Sleep State Select the highest ACPI sleep state the system will enter when the suspend button is pressed. Configuration options are Suspend Disabled, S1 only (CPU Stop Clock), and S3 only (Suspend to RAM).
MANO873 Series All-In-One Mini ITX Board Trusted Computing This screen provides function for specifying the TPM settings. Security Device Support Use this item to enable or disable BIOS support for security device.
MANO873 Series All-In-One Mini ITX Board CPU Configuration This screen shows the CPU information. EIST ® Enable or disable Intel SpeedStep. When enabled, CPU speed is controlled by the operating system. When disabled, CPU runs at its default speed. Turbo Mode This item is for enabling or disabling turbo mode. When enabled, it allows processor cores to run faster than marked frequency under certain conditions.
MANO873 Series All-In-One Mini ITX Board SATA Configuration In this Configuration menu, you can see the currently installed hardware in the SATA ports. During system boot up, the BIOS automatically detects the presence of SATA devices. SATA Controller(s) Enable or disable SATA device. SATA Mode Selection Determine how SATA controller(s) operate. Operation mode options are IDE Mode, AHCI Mode and RAID Mode.
MANO873 Series All-In-One Mini ITX Board PCH-FW Configuration This screen displays Management Engine (ME) Firmware information. AMT Configuration Use this screen to configure AMT parameters. Intel AMT ® Enable or disable Intel Active Management Technology BIOS Extension. Disable ME Enable or disable ME functionality.
MANO873 Series All-In-One Mini ITX Board USB Configuration You can use this screen to select options for the USB Configuration, and change the value of the selected option. A description of the selected item appears on the right side of the screen. USB Devices Display all detected USB devices. Legacy USB Support Use this item to enable or disable support for USB device on legacy operating system. The default setting is Enabled. Auto option disables legacy support if no USB devices are connected.
MANO873 Series All-In-One Mini ITX Board NCT6627UD Super IO Configuration You can use this screen to select options for the Super IO Configuration, and change the value of the selected option. A description of the selected item appears on the right side of the screen. For items marked with “”, please press for more options. Serial Port 1~4 Configuration Use this item to set parameters of serial port 1 to 4.
MANO873 Series All-In-One Mini ITX Board NCT6627UD HW Monitor Use this screen for Smart Fan configuration and hardware health status monitoring. This screen displays the temperature of system and CPU, cooling fan speed in RPM and system voltages (VCORE, +12V, +3.3V and +5V). Smart Fan Function Enable or disable Smart Fan function.
MANO873 Series All-In-One Mini ITX Board 5.5 Chipset Menu The Chipset menu allows users to change the advanced chipset settings. You can select any of the items in the left frame of the screen to go to the sub menus: ► PCH-IO Configuration ► System Agent (SA) Configuration For items marked with “”, please press for more options.
MANO873 Series All-In-One Mini ITX Board PCH-IO Configuration This screen allows you to set PCH parameters. USB Configuration Use this item for USB configuration settings. PCH Azalia Configuration Use this item for PCH Azalia configuration settings. Launch PXE OpROM policy Control the execution of UEFI and Legacy PXE OpROM. PCH LAN Controller Enable or disable PCH LAN controller. Wake on LAN Enable or disable Wake on LAN functionality.
MANO873 Series All-In-One Mini ITX Board PCH Azalia Configuration This screen allows you to set PCH Azalia configuration. Azalia Control detection of the Azalia device. Configuration options are Disabled, Enabled and Auto.
MANO873 Series All-In-One Mini ITX Board System Agent (SA) Configuration This screen shows System Agent information and provides function for specifying related parameters. For items marked with “”, please press for more options. VT-d ® Enable or disable Intel chipset virtualization technology for directed I/O. VT-d can help end users improve security and reliability of the systems and also improve performance of I/O devices in virtualized environment.
MANO873 Series All-In-One Mini ITX Board Graphics Configuration Primary Display Allow you to select which graphics controller to use as the primary boot device. Primary IGFX Boot Display Allow you to select the display device which will be activated during POST. This has no effect if external graphics present. Secondary boot display selection will appear based on your selection. Primary IGFX boot display options are CRT and DVI.
MANO873 Series All-In-One Mini ITX Board 5.6 Boot Menu The Boot menu allows users to change boot options of the system. Setup Prompt Timeout Number of seconds to wait for setup activation key. 65535(0xFFFF) means indefinite waiting. Bootup NumLock State Use this item to select the power-on state for the keyboard NumLock. Quiet Boot Select to display either POST output messages or a splash screen during boot-up.
MANO873 Series All-In-One Mini ITX Board 5.7 Security Menu The Security menu allows users to change the security settings for the system. Administrator Password This item indicates whether an administrator password has been set (installed or uninstalled). User Password This item indicates whether an user password has been set (installed or uninstalled).
MANO873 Series All-In-One Mini ITX Board 5.8 Save & Exit Menu The Save & Exit menu allows users to load your system configuration with optimal or fail-safe default values. Save Changes and Exit When you have completed the system configuration changes, select this option to leave Setup and return to Main Menu. Select Save Changes and Exit from the Save & Exit menu and press . Select Yes to save changes and exit.
MANO873 Series All-In-One Mini ITX Board Discard Changes Select this option to quit Setup without making any permanent changes to the system configuration. Select Discard Changes from the Save & Exit menu and press . Select Yes to discard changes. Restore Defaults It automatically sets all Setup options to a complete set of default settings when you select this option. Select Restore Defaults from the Save & Exit menu and press .
MANO873 Series All-In-One Mini ITX Board Appendix A Watchdog Timer About Watchdog Timer After the system stops working for a while, it can be auto-reset by the watchdog timer. The integrated watchdog timer can be set up in the system reset mode by program.
MANO873 Series All-In-One Mini ITX Board Program Example 2E, 87 2E, 87 2E, 07 2F, 08 Logical Device 8 2E, 30 Activate 2F, 01 2E, F5 2F, N Set Minute or Second; N=08 (Min), 00(Sec) 2E, F6 2F, M Set Value; M=00~FF Note: If N=00h, the time base is set to second. M = time value 00h: Time-out Disable 01h: Time-out occurs after 1 second 02h: Time-out occurs after 2 seconds 03h: Time-out occurs after 3 seconds . . FFh: Time-out occurs after 255 seconds If N=08h, the time base is set to minute.
MANO873 Series All-In-One Mini ITX Board Appendix B Digital I/O Using Digital Output Function O 2E 87 O 2E 87 O 2E 07 O 2F 08 O 2E 30 O 2F 02 Setting DIO is active O 2E E0 O 2F 00 00: The respective DIO is programmed as an output port O 2E E1 O 2F NN NN: Setting output value Note: NN=01 means output value is “00000001”, DIO1 is output high, the rest DIO2~DIO8 are output low.
MANO873 Series All-In-One Mini ITX Board This page is intentionally left blank.
MANO873 Series All-In-One Mini ITX Board Appendix C Configuring SATA for RAID Configuring SATA Hard Drive(s) for RAID Function Before you begin the SATA configuration, please prepare: Two SATA hard drives (to ensure optimal performance, it is recommended that you use two hard drives with identical model and capacity). If you do not want to create RAID with the SATA controller, you may prepare only one hard drive. An empty formatted floppy disk. Windows XP setup disk.
MANO873 Series All-In-One Mini ITX Board 2.1. Turn on your system, and then press the button to enter BIOS Setup during running POST (Power-On Self Test). If you want to create RAID, just go to the Advanced Settings menu, select the “SATA Mode Selection”, and press for more options. A list of options appears, please select “RAID”. 2.2. Set DVD-ROM for First Boot Option under the Boot Settings menu to boot DVD-ROM after system restarts. 2.3. Save and exit the BIOS Setup.
MANO873 Series All-In-One Mini ITX Board 3. Configuring RAID by the RAID BIOS. Enter the RAID BIOS setup utility to configure a RAID array. Skip this step and proceed if you do not want to create a RAID. 3.1. After the POST memory testing and before the operating system booting, a message "Press to enter Configuration Utility" shows up, accordingly, press to enter the RAID BIOS setup utility. 3.2. After you press , the Create RAID Volume screen will appear.
MANO873 Series All-In-One Mini ITX Board 3.3. After entering the Create Volume Menu screen, you can type the disk array name with 1~16 letters (letters cannot be special characters) in the item “Name”. 3.4. When finished, press to select a RAID level. There are three RAID levels: RAID0, RAID1 and RAID5 & RAID10. Select a RAID level and press .
MANO873 Series All-In-One Mini ITX Board 3.5. Set the stripe block size. The KB is the standard unit of stripe block size. The stripe block size can be 4KB to 128KB. After the setting, press for the array capacity. 3.6. After setting all the items on the menu, select Create Volume and press to start creating the RAID array.
MANO873 Series All-In-One Mini ITX Board 3.7. When prompting the confirmation, press to create this volume, or to cancel the creation. After the creation is completed, you can see detailed information about the RAID Array in the Disk/Volume Information section, including RAID mode, disk block size, disk name, and disk capacity, etc.
MANO873 Series All-In-One Mini ITX Board Delete RAID volume If you want to delete a RAID volume, select the Delete RAID Volume option in Main Menu. Press and follow on-screen instructions. Please press to exit the RAID BIOS utility. Now, you can proceed to install a SATA driver controller and the operating system. 4. Making a SATA driver disk. To install the operating system onto a serial ATA hard disk successfully, you need to install the SATA controller driver during the OS installation.
MANO873 Series All-In-One Mini ITX Board 5.1. Restart your system to boot the Windows 2000/XP Setup disk, and press button as soon as you see the message "Press F6 if you need to install a 3rd party SCSI or RAID driver". After pressing the button, there will be a few moments for some files being loaded before next screen appears. 5.2. When you see the screen below, insert the floppy disk containing the SATA driver and press .
MANO873 Series All-In-One Mini ITX Board 5.3. If the Setup correctly recognizes the driver of the floppy disk, a controller menu will appear below. Use the keys to select “Intel(R) Desktop/Workstation/Server Express Chipset SATA RAID Controller” and press . Then it will begin to load the SATA driver from the floppy disk. Note: If a message on the screen saying that one or some file(s) cannot be found, please check the floppy disk or copy the correct SATA driver again from the driver DVD.
MANO873 Series All-In-One Mini ITX Board This page is intentionally left blank.
MANO873 Series All-In-One Mini ITX Board Appendix D Intel® iAMT Settings ® ® The Intel Active Management Technology (Intel iAMT) has decreased a major barrier to IT efficiency that uses built-in platform capabilities and popular third-party management and security applications to allow IT a better discovering, healing, and protection their networked computing assets.
MANO873 Series All-In-One Mini ITX Board Set and Change Password 1. 72 You will be asked to set a password when first log in. The default password is “admin”.
MANO873 Series All-In-One Mini ITX Board 2. You will be asked to change the password before setting ME. 3. You must confirm your new password while revising. The new password must contain: (example: !!11qqQQ) (default value). Eight characters One upper case One lower case One number One special symbol, such as ! 、 $ or ; ， (、 " , excepted) Underline ( _ ) and space are valid characters for password, but they won’t make higher complexity.
MANO873 Series All-In-One Mini ITX Board Intel® iAMT Web Console 1. ® From a web browser, please type http://(IP ADDRESS):16992, which connects to Intel iAMT Web. Example: http://10.1.40.214:16992 2. To log on, you will be required to type in username and password for access to the Web.
MANO873 Series All-In-One Mini ITX Board 3. Enter the iAMT Web. 4. Click Remote Control, and select commands on the right side. 5. When you have finished using the iAMT Web console, close the Web browser.
MANO873 Series All-In-One Mini ITX Board This page is intentionally left blank.
