User`s manual

MANO831 Mini ITX Board
Board and Pin Assignments 17
2.3.10 USB Connectors (USB45 and USB6)
These connectors are for USB 2.0 ports. Connect the optional USB module cable to any
of these connectors, then install the module to a slot opening at the back of the system
chassis. These USB connectors comply with USB 2.0 specification that supports up to
480 Mbps connection speed.
USB45
2
USB6
Caution
Never connect a 1394 cable to the USB connectors. Doing so will damage
the motherboard!
2.3.11 Keyboard/Mouse Connector (KB1)
This connector is for PS/2 keyboard and mouse.
Pin
Signal
Pin
Signal
1
USB+5V
2
USB+5V
3
USB_P4_N
4
USB_P5_N
5
USB_P4_P
6
USB_P5_P
7
GND
8
GND
9
NC
Pin
Signal
1
+5V
2
USB_P6_N
3
USB_P6_P
4
GND
5
NC
Pin
Signal
1
Keyboard Clock
2
Keyboard Data
3
Mouse Data
4
GND
5
+5V STBY
6
Mouse Clock
1
1
1