User`s manual

MANO120 Mini-ITX SBC User’s Manual
Introduction
7
1.5.2 Memory Configurations
You can install 1GB, 2GB and 4GB DDR3 DIMMs into the SODIMM sockets using the
memory configurations in this section.
 Installing DDR3 DIMM other than the recommended configurations
may cause memory sizing error or system boot failure. Use any of
the recommended configurations.
 Always install DIMMs with the same CAS latency. For optimum
compatibility, it is recommended that you obtain memory modules
from the same vendor.
 This motherboard does not support memory modules made up of
128 Mb chips or double-sided x16 memory modules.
Make sure that the memory frequency matches the CPU FSB (Front
Side Bus). Refer to the Memory frequency/CPU FSB synchronization
table.