User`s manual

input/out or other connectors shall comply with relevant

UL/IEC standard.

11. Do not open the system’s back cover. If opening the cover

for maintenance is a must, only a trained technician is

allowed to do so. Integrated circuits on computer boards are

sensitive to static electricity. To avoid damaging chips from

electrostatic discharge, observe the following precautions:

z Before handling a board or integrated circuit, touch an

unpainted portion of the system unit chassis for a few

seconds. This will help to discharge any static

electricity on your body.

z When handling boards and components, wear a wrist-

grounding strap, available from most electronic

component stores.

Classification

1. Degree of production against electric shock: not classified

2. Degree of protection against the ingress of water: IPX1

3. Equipment not suitable for use in the presence of a

flammable anesthetic mixture with air or with oxygen or

nitrous oxide.

4. Mode of operation: Continuous

5. Type of protection against electric shock: Class I equipment