User`s manual

EP850 All-In-One EPIC Board User’s Manual
AMI BIOS Setup Utility
42
¾ Resume On LAN
This item enables or disables the function of Resume On
LAN that resume the system through the network.
¾ Resume On PME#
This item enables or disables the function of Resume On
PME# (Power Management Event). Enabling this item
allows the system to resume from standby mode.
¾ Resume On RTC Alarm
You can set “Resume On RTC Alarm” item to enabled and
key in Data/time to power on system.
z MPS Configuration
This screen shows the MPS (Multi Processor Specification)
Configuration, and you can change its value. A description of the
selected item appears on the right side of the screen.
¾ MPS Revision
Use this item to select MPS (Multi Processor Specification)
Revision 1.1 or 1.4. The default setting is 1.4.