User`s manual

EP850 All-In-One EPIC Board User’s Manual
AMI BIOS Setup Utility
41
¾ Hard Disk Drive Power Down Mode
This option specifies the power conserving state that the
hard disk drive enters after the specified period of hard
drive inactivity has expired. The default setting is Suspend.
Disabled
This setting prevents hard disk drive power down
mode.
Standby
This option stops the hard disk drives from spinning
during a system standby.
Suspend
This option cuts the power to the hard disk drives
during a system suspend. This is the default setting.
¾ Standby Time Out
This option specifies the length of time the system waits
before it enters standby mode. The default setting is
Disabled.
Disabled
Set this value to prevent the computer system from
entering standby mode. This is the default setting.
1 Min
Set this value to allow the computer system to enter
standby mode after being inactive for 1 minute.
5 Min
Set this value to allow the computer system to enter
standby mode after being inactive for 5 minutes.
10 Min
Set this value to allow the computer system to enter
standby mode after being inactive for 10 minutes.
¾ Suspend Time Out (Minute)
This option specifies the length of time the system waits
before it enters suspend mode. The default setting is
Disabled.
Disabled
This setting prevents the system from entering suspend
mode. This is the default setting.
1 Min
Set this value to allow the computer system to enter
suspend mode after being inactive for 1 minute.
5 Min
Set this value to allow the computer system to enter
suspend mode after being inactive for 5 minutes.
10 Min
Set this value to allow the computer system to enter
suspend mode after being inactive for 10 minutes.
¾ Resume On Ring
This item enables or disables the function of Resume On
Ring that resume the system through incoming calls.