User`s manual

EP850 All-In-One EPIC Board User’s Manual
Jumpers and Connectors
25
2.4.16 USB Port Connector (USB3)
The EP850 Series features Universal Serial Bus (USB) connectors,
compliant with USB 2.0 (480Mbps) that can be adapted to any USB
peripherals, such as monitor, keyboard and mouse.
USB3 is a double-deck USB port connector that consists of two 4-pin
standard USB ports.
Pin Signal Pin Signal
1 +5V 2 USB DO-
3 USB D0+ 4 GND
5 +5V 6 USB D1-
7 USB D1+ 8 GND
2.4.17 USB Connectors (USB1, USB2)
The Universal Serial Bus (USB) connector on the board is for the
installation of peripherals supporting the USB interface. USB1 and
USB2 is a 10-pin standard onboard USB connector.
Pin Signal Pin Signal
1 +5V 2 +5V
3 USB D2- 4 USB D3-
5 USB D2+ 6 USB D3+
7 GND 8 GND
9 GND 10 GND
2.4.18 CompactFlash™ Socket (SCF1)
The board is equipped with a CompactFlash
TM
disk socket on the
solder side to support an IDE2 interface CompactFlash
TM
disk card.
The socket is especially designed to avoid incorrect installation of the
CompactFlash
TM
disk card. When installing or removing the
CompactFlash
TM
disk card, please make sure the system power is off.
The CompactFlash
TM
disk card is defaulted as the C: or D: disk drive in
your PC system.