User`s manual

eBOX530-820-FL Series User’s Manual
Hardware Installation
18
2.3 Installing the CompactFlash
TM
Card
** NOTICE **
Two graphics drivers, but only one can be installed in eBOX530.
z Windows XP GMA 500 driver
The default setting of display output under Windows XP GMA
500 driver is LVDS port. If you only connect VGA port to install
driver, please press "Ctrl+Alt+F1" to switch the display output
to VGA port.
z Windows XP IEGD driver
The eBOX530-820-FL offers a convenient drive bay module for users
to install HDD. The system offers users one 2.5” Hard Disk Drive for
installation. Please follow the steps:
Step 1 Turn off the system, and unplug the AC/DC power cord.
Step 2 Turn the system upside down to locate screws at the bottom.
Step 3 Loosen these screws, and remove the back cover from the
system.