User`s manual

PICO820 Series All-In-One PICO ITX Board User’s Manual

Phoenix-Award BIOS Utility

z Video Off Method

This setting determines the manner in which the monitor is blanked.

V/H

SYNC+Blank

Turns OFF vertical and horizontal

synchronization ports and writes blanks to the

video buffer

DPMS

Select this option if your monitor supports the

Display Power Management Signaling (DPMS)

standard of the Video Electronics Standards

Association (VESA). Use the software supplied

for your video subsystem to select video power

management values.

Blank Screen

System only writes blanks to the video buffer.

z Video Off In Suspend

This item defines if the video is powered down when the system is

put into suspend mode.

z Suspend Type

If this item is set to the default Stop Grant, the CPU will go into Idle

Mode during power saving mode.

z Suspend Mode

After the selected period of system inactivity (1 minute to 1 hour),

all devices except the CPU shut off. The default value is “Disabled”.

Disabled

System will never enter SUSPEND mode

1/2/4/6/8/10/2

0/30/40

Min/1 Hr

Defines the continuous idle time before the system

entering SUSPEND mode.

If any item defined in (J) is enabled & active,

SUSPEND timer will be reloaded

z HDD Power Down

If HDD activity is not detected for the length of time specified in this

field, the hard disk drive will be powered down while all other

devices remain active.

z Soft-Off by PWR-BTTN

This option only works with systems using an ATX power supply. It

also allows the user to define which type of soft power OFF

sequence the system will follow. The default value is “Instant-Off”.