User`s manual

PICO820 Series All-In-One PICO ITX Board User’s Manual
Jumpers and Connectors
16
2.4.6 Serial ATA Power Connector (CN6)
The CN6 is a 2.5mm wafer connector for Serial ATA Power.
Pin Signal
1 +5V
2 GND
2.4.7 Flat Panel Bezel Connector (CN7)
 Power LED
This 3-pin connector denoted as Pin 1 and Pin 5 connects the
system power LED indicator to such a switch on the case. Pin 1 is
assigned as +, and Pin 5 as -. The Power LED lights up when the
system is powered ON.
 External Speaker and Internal Buzzer Connector
Pin 2, 4, 6 and 8 can be connected to the case-mounted speaker
unit or internal buzzer. While connecting the CPU card to an
internal buzzer, please short pins 2-4; while connecting to an
external speaker, you need to set pins 2-4 to Open and connect the
speaker cable to pin 8 (+) and pin 2 (-).
 ATX Power On/Off Button
This 2-pin connector denoted as Pin 9 and 10 connects the front
panel’s ATX power button to the CPU card, which allows users to
control ATX power supply to be power on/off.
 System Reset Switch
Pin 11 and 12 can be connected to the case-mounted reset switch
that reboots your computer instead of turning OFF the power switch.
It is a better way to reboot your system for a longer life of the
system’s power supply.