System information

Manual:Troubleshooting tools

icmp 480bps 480bps

ospf 0bps 192bps

[admin@MikroTik] tool>

In order to see what protocols are linked to a host connected to interface 10.0.0.144/32 ether1:

[admin@MikroTik] tool> torch ether1 src-address=10.0.0.144/32 protocol=any

PRO.. SRC-ADDRESS TX RX

tcp 10.0.0.144 1.01kbps 608bps

icmp 10.0.0.144 480bps 480bps

[admin@MikroTik] tool>

IPv6

Starting from v5RC6 torch is capable of showing IPv6 traffic. Two new parameters are introduced src-address6 and

dst-address6. Example:

admin@RB1100test] > /tool torch interface=bypass-bridge src-address6=::/0 ip-protocol=any sr

c-address=0.0.0.0/0

MAC-PROTOCOL IP-PROT... SRC-ADDRESS TX RX

ipv6 tcp 2001:111:2222:2::1 60.1kbps 1005.4kbps

ip tcp 10.5.101.38 18.0kbps 3.5kbps

ip vrrp 10.5.101.34 0bps 288bps

ip udp 10.5.101.1 0bps 304bps

ip tcp 10.0.0.176 0bps 416bps

ip ospf 224.0.0.5 544bps 0bps

78.7kbps 1010.0kbps

To make /ping tool to work with domain name that resolves IPv6 address use the following:

/ping [:resolve ipv6.google.com]

By default ping tool will take IPv4 address.