System information

Manual:Tools/Packet Sniffer

ip-protocol (read-only: ddp | egp | encap | ggp | gre | hmp | icmp | icmpv6 | dpr-cmt | igmp | ip |

xns-idp | xtp)

The name/number of IP protocol

protocol (read-only: ip | arp | rarp | ipx | ipv6) The name/number of ethernet

protocol

size (read-only: integer) Size of packet

src-address (read-only: IP address) Source IP address

src-mac (read-only: MAC address) Source MAC address

data (read-only: string) IP data

tcp-flags (read-only: ack | cwr | ece | fin | psh | rst | syn | urg) TCP flags

time (read-only: time) Time when packet arrived

ttl (read-only: integer) IP Time To Live

vlan-id (read-only: integer) VLAN-ID of the packet

vlan-priority (read-only: integer) VLAN-Priority of the packet

Packet Sniffer Protocols

Sub-menu: /tool sniffer protocol

In this submenu you can see all sniffed protocols and their share of the whole sniffed amount.

[admin@SXT test] /tool sniffer protocol> print

# PROTOCOL IP-PROTOCOL PORT PACKETS BYTES SHARE

0 802.2 1 60 0.05%

1 ip 215 100377 99.04%

2 arp 2 120 0.11%

3 ipv6 6 788 0.77%

4 ip tcp 210 99981 98.65%

5 ip udp 3 228 0.22%

6 ip ospf 2 168 0.16%

7 ip tcp 8291 (winbox) 210 99981 98.65%

8 ip tcp 36771 210 99981 98.65%

9 ip udp 646 3 228 0.22%

Property Description

bytes (read-only: integer) Total number of data bytes

ip-protocol (read-only: ddp | egp | encap | ggp | gre | hmp | icmp | icmpv6 | dpr-cmt | igmp | ip | ipencap |

ipip | ipsec-ah | ipsec-esp | iso-tp4 | ospf | pim | pup | rdp | rspft | st | tcp | udp | vmtp | vrrp | xns-idp | xtp)

IP protocol

packets (read-only: integer) The number of packets

port (read-only: integer) The port of TCP/UDP protocol

protocol (read-only: ip | arp | rarp | ipx | ipv6) The name/number of the

protocol

share (read-only: decimal) Specific type of traffic compared

to all traffic in bytes