System information

Manual:System/LCD

LCD Information Display Configuration

Sub-menu: /system lcd page

The submenu is used to configure LCD information display: what pages and how long they will be shown. You

cannot neither add your own pages (they are created dynamically depending on the configuration) nor change pages'

description.

Pages will be displayed for specified amount of time starting from the first one.

Example

To display all the pages:

[admin@MikroTik] system lcd page> print

Flags: X - disabled

# DISPLAY-TIME DESCRIPTION

0 X 5s System date and time

1 X 5s System resources - cpu and memory load

2 X 5s System uptime

3 X 5s Aggregate traffic in packets/sec

4 X 5s Aggregate traffic in bits/sec

5 X 5s Software version and build info

6 X 5s ether1

7 X 5s prism1

[admin@MikroTik] system lcd page> enable [find]

[admin@MikroTik] system lcd page> print

Flags: X - disabled

# DISPLAY-TIME DESCRIPTION

0 5s System date and time

1 5s System resources - cpu and memory load

2 5s System uptime

3 5s Aggregate traffic in packets/sec

4 5s Aggregate traffic in bits/sec

5 5s Software version and build info

6 5s ether1

7 5s prism1

[admin@MikroTik] system lcd page>

To set "System date and time" page to be displayed for 10 seconds:

[admin@MikroTik] system lcd page> set 0 display-time=10s

[admin@MikroTik] system lcd page> print

Flags: X - disabled

# DISPLAY-TIME DESCRIPTION

0 10s System date and time

1 5s System resources - cpu and memory load

2 5s System uptime

3 5s Aggregate traffic in packets/sec

4 5s Aggregate traffic in bits/sec

5 5s Software version and build info

6 5s ether1