System information

Manual:Console
11
•• [d] - leaves everything as-is.
If too many changes are made while in safe mode, and there's no room in history to hold them all (currently history
keeps up to 100 most recent actions), then session is automatically put out of the safe mode, no changes are
automatically undone. Thus, it is best to change configuration in small steps, while in safe mode. Pressing [Ctrl]+[X]
twice is an easy way to empty safe mode action list.
HotLock Mode
When HotLock mode is enabled commands will be auto completed.
To enter/exit HotLock mode press [CTRL]+[V].
[admin@MikroTik] /ip address> [CTRL]+[V]
[admin@MikroTik] /ip address>>
Double >> is indication that HotLock mode is enabled. For example if you type /in e, it will be auto completed
to
[admin@MikroTik] /ip address>> /interface ethernet
Quick Help menu
F6 key enables menu at the bottom of the terminal which shows common key combinations and their usage.
[admin@RB493G] >
tab compl ? F1 help ^V hotlk ^X safe ^C brk ^D quit
Manual:Console login process
Applies to RouterOS: 2.9, v3, v4
Description
There are different ways to log into console:
•• serial port
•• console (screen and keyboard)
•• telnet
•• ssh
•• mac-telnet
•• winbox terminal
Input and validation of user name and password is done by login process. Login process can also show different
informative screens (license, demo version upgrade reminder, software key information, default configuration).
At the end of successful login sequence login process prints banner and hands over control to the console process.
Console process displays system note, last critical log entries, auto-detects terminal size and capabilities and then
displays command prompt]. After that you can start writing commands.