System information

Manual:Create Certificates
125
0 KR name="cert1" subject=C=LV,ST=RI,L=Riga,O=MT,CN=server,emailAddress=[e-mail]
issuer=C=LV,ST=RI,L=Riga,O=MT,CN=MT CA,emailAddress=[e-mail] serial-number="01"
email=[e-mail] invalid-before=jun/25/2008 07:24:33
invalid-after=jun/23/2018 07:24:33 ca=yes
Note: If you want to use server certificates for OVPN or SSTP and use client certificate verification, then CA
certificate must be imported, too.
[ Top | Back to Content ]
Manual:Tools/Traffic Generator
Applies to RouterOS: v5 +
Summary
Traffic Generator is a tool that allows to evaluate performance of DUT (Device Under Test) or SUT (System Under
Test).
Tool can generate and send RAW packets over specific ports. It also collects latency and jitter values, tx/rx rates,
counts lost packets and detects Out-of-Order (OOO) packets.
Traffic Generator can be used similar to bandwidth test tool as well as generate packets that will be routed back to
packet generator for advanced status collection.
General
Sub-menu /tool traffic-generator
This menu allows to set general traffic generator properties and contains commands to quickly start and stop the tool.
Properties
Property Description
latency-distribution-scale (integer [0..28]; Default: 10)
test-id (integer [0..255]; Default: 0)
Read-Only Properties