User`s manual

CAPA831 Intel
®
Atom
TM
D2550/N2800/N2600 Processor 3.5” SBC
Introduction 1
Chapter 1
Introduction
The CAPA831, a Capa board, supports Intel
®
Atom
TM
D2550/N2800/N2600 processors . The
board integrates the Intel
®
NM10 chipset and delivers outstanding system performance
through high-bandwidth interfaces, multiple I/O functions for interactive applications and
various embedded computing solutions.
There is one 204-pin unbuffered SO-DIMM socket for single channel DDR3-800/1066MHz
memory, maximum memory capacity up to 4GB (N2600 supports DDR3-800 up to 2GB only).
It also features two Gigabit/Fast Ethernet ports, one serial ATA channels for total one Serial
ATA hard drive at maximum transfer rate up to 300MB/sec, six USB 2.0 high speed compliant,
and built-in HD audio codec that can achieve the best stability and reliability for industrial
applications. Additionally, it provides you with unique embedded features, such as four serial
ports and 3.5” form factor that applies an extensive array of PC peripherals.
1.1 Features
 Intel
®
Atom
TM
dual core D2550 (1.86 GHz), N2800 (1.86GHz) and N2600 (1.6GHz)
 Intel
®
NM10 chipset
 1 DDR3 SO-DIMM supports up to 4GB memory capacity
 6 USB 2.0 ports
 4 COM ports
 +12V only DC-in supported