User`s manual

CAPA831 Intel

Atom

D2550/N2800/N2600 Processor 3.5” SBC

AMI BIOS Setup Utility 41

 IDE Configuration

In the IDE Configuration menu, you can see the currently installed hardware in the SATA

ports. During system boot up, the BIOS automatically detects the presence of SATA

devices.

Configure SATA as

Determine how SATA controller(s) operate. Operation mode options are IDE Mode and

AHCI (Advanced Host Controller Interface) Mode.

mSATA

It is to enable mSATA when the mSATA cards are installed in CN4 (see section 2.4.4).

Default setting is Disabled.

CFAST

Default setting is Enabled. Once mSATA is enabled, it will be set Disabled automatically.