User's Manual

SMiRF

- QSG

Maintaining Your Handheld

Environmental Factors

Storage Conditions

Store the SMiRF in a cool dry place.

Operating Conditions

While operating the SMiRF please ensure it is free of moisture, particularly when

operating around electrical equipment. The SMiRF is waterproof and dustproof and can

be operated in most environmental conditions. We do not recommend operating the

SMiRF in extreme conditions (e.g. underwater for long periods, in extreme hot and cold

environments, or at extreme altitude).

Cleaning Your SMiRF

When removing mud or other debris from the SMiRF, use a damp cloth and a soft bristle

brush and completely dry the SMiRF before use.

Maintaining your Battery Pack

Changing the Battery

Before changing the battery to save data on the PDA by performing a backup the SMiRF

so no data is lost. After Backing up the SMiRF Follow the directions below to change the

battery:

1. Either perform a HotSync or perform card backup to save any data in the SMiRF

2. Remove the battery clip

3. Remove the old battery

4. Install the new battery

5. Replace the retaining clip

6. Sync or restore the card backup depending on what you did in step one.

Battery Usage

The SMiRF comes with a rechargeable Lithium Ion battery pack that can be purchased

from Aceeca or participating resellers. The battery life between charges varies with

usage but typically allows up to 30 hours of continuous use.

Warning

For safety reasons, ensure that the SMiRF is completely dry before charging and

operating near electrical equipment.