User's Manual

SMiRF
®
- QSG
Displays the SMiRF module operating firmware and firmware stored for
upgrading other MeshPlus devices. Firmware is automatically loaded into the
SMiRF during task synchronization and then installed on the SMiRF module
when the software restarts.
▪ Preferences
User preferences such as whether to allow handwriting recognition (Graffiti),
whether to require GPS coordinates for all installations, etc. are configured and
stored using user Preferences.
▪ Defaults
Use Defaults to change default installation settings such as the default number of
register dials or multipliers for pulse registers. Default settings are stored
persistently in the SMiRF.
▪ Server
The MeshMaster server provides service management via work orders as well as
access to firmware upgrades and other data. In order for the SMiRF to
synchronize with the MeshMaster server, it must be configured with the
appropriate internet address and security information.
▪ User
The MeshMaster manages work orders for a user. In order to get the specialized
work orders for a user (technician), the user's login name and password must be
configured.
Help Menu
The Help menu provides information about the SMiRF
application software and several advanced diagnostic
features.
▪ GPS
Provides detailed status regarding the state of
the GPS satellite receiver.
▪ About
Displays information about the SMiRF
operating environment and software version.
Copyright 2013, Axiometric, LLC Page 13 Confidential