User's Manual

ManualsBrandsAxiometric ManualsElectronicsBER2 Repeater

Stealth Repeater

- QSG

Introduction

MeshPlus

networks are used for remote monitoring and control of commercial, industrial, and

municipal equipment such as automatic utility metering, municipal lighting, and traffic

management. Hundreds of thousands of devices are currently monitored and controlled by

MeshPlus

networks.

The MeshPlus

Battery Repeater 2 (Stealth Repeater) extends the range of a MeshPlus system

by receiving, storing, and re-transmitting radio messages from other MeshPlus

devices. The

Stealth Repeater operates on internal battery power and as such can be discretely located in

locations where power is not available. Features of the Stealth Repeater include:

• External high-gain antenna

• Second generation mesh radio

◦ long RF range

◦ interference resistance

◦ backward compatible with 1

generation

• Push-button connect to MeshPlus infrastructure

• Field replaceable batteries

• Integrated battery tester/conditioner

• Compact, light-weight, weatherproof enclosure

• Locking/tamper-resistant access

• Extended temperature range

• Optional USB interface

• Optional external DC power

By following the instructions in this quick start guide,

you can get your Stealth Repeater up and running

quickly and easily.

Your MeshPlus

Stealth Repeater product kit includes:

• Stealth Repeater battery repeater

• High gain antenna

• 4x ER34615 lithium primary batteries

Optional accessories include:

• Pole mount and straps

• Pipe Clamp

• Mounting screws with gasket

• Mounting feet

• Tamper resistant seal

This manual will get you acquainted with your Stealth Repeater and help you get it installed,

configured, and connected to your MeshPlus network quickly and easily. Please read this guide

completely before installing your Stealth Repeater; pay special attention to safety instructions,

especially when mounting antennas near power lines.

MeshPlus Stealth Repeater