User's Manual

Stealth Repeater

- QSG

Trouble-shooting

LED not working

When checking batteries

If a LED light doesn't come on when you are checking a battery. This means that

the battery is bad. To make sure that it is in fact a bad battery complete a Battery

Test 2-3 times to make sure if the battery is bad. If it doesn't light up then the

battery is bad and should be properly disposed of.

Antenna

If the Stealth repeater isn't connecting properly it maybe an antenna problem.

The Antenna's connection to the Stealth Repeater might have been damaged

from weather or nature. Check the connection between the Stealth Repeater and

the Antenna to make sure that it is the connection that is the problem and not

else where.

No Connection

When trying to connect the Stealth Reapter to a device (either MeshMaster

System Manger or a Mesh. If when clicking the “Connect” button doesn't work

check on the Antenna to make sure it isn't a problem with the connection

between the two. If this doesn't work check to other side to make sure nothing is

wrong. So that means to check the System Manager or a device from the Mesh.

If this doesn't seem to work manually connect the devices together with a usb

cable.

Specification