Product Overview

CLEAN 3

SYSTEM CLEANER FOR “NEW”

HYDRONIC SYSTEMS

Suitable for all kinds of new hydronic heating

and cooling systems: traditional hydronic

heating systems, chilled water systems, and

geothermal systems.

FEATURES and BENEFITS



Low concentration requirements (0.5 litres or 16.9 oz. treats 100 litres or 25

U.S. gallons of water. Dosage: 0.5%)



Neutral pH does not corrode or damage gaskets, plastics, or metals (steel,

copper, and aluminum)



Eco friendly chemicals do not contain harmful or hazardous substances



Easy to use, the heating system can be cleaned both with the boiler on or off



Provides energy savings by removing oil residue and metal oxides



Reduces maintenance costs



Available in 500 mL (16.9 oz.) and 2 litres (½ U.S. gallon) bottles

PAGE 1
CLEAN 3 SYSTEM CLEANER FOR “NEW” HYDRONIC SYSTEMS Suitable for all kinds of new hydronic heating and cooling systems: traditional hydronic heating systems, chilled water systems, and geothermal systems. FEATURES and BENEFITS Low concentration requirements (0.5 litres or 16.9 oz. treats 100 litres or 25 U.S. gallons of water. Dosage: 0.
PAGE 2
DIRECTIONS: Add 1 bottle (500 mL or 16.9 oz.) of AXI-THERM CLEAN 3 for every 100 litres (25 gallons) of water (Dosage: 0.5 %). Use an AXI-THERM INJET to add the product to the system. It must circulate for at least 2 days when using the existing system circulator. The product may remain in the system for up to 30 days and the boiler may be on or off during the cleaning period. Flushing the system with the AXI-THERM TOPFLUSH (flush cart) can reduce the cleaning operation to 2 to 4 hours.