Product Overview

CLEAN 10

HYDRONIC SYSTEM AND BOILER CLEANER

High dosage cleaner is for the most troubled

systems. Suitable for all kinds of hydronic

heating and cooling systems: traditional

hydronic heating systems, chilled water

systems, and geothermal systems.

FEATURES and BENEFITS



Low concentration requirements (5 litres or 169 oz. treats 100 litres or 25 U.S.

gallons of water. Dosage: 5 to 10%)



Neutral pH does not corrode or damage gaskets, plastics, or metals (steel,

copper, and aluminum)



Eco friendly chemicals do not contain harmful or hazardous substances



Easy to use, the heating system can be cleaned both with the boiler on or off



Provides energy savings by removing limescale, sludge, and metal oxide

incrustations inside the boiler and hydronic system



Restores heat transfer and water circulation to their original levels



Reduces maintenance costs



Available in 5 litre (1.3 U.S. gallon) and 20 litres (5.3 U.S. gallon) bottles

PAGE 1
CLEAN 10 HYDRONIC SYSTEM AND BOILER CLEANER High dosage cleaner is for the most troubled systems. Suitable for all kinds of hydronic heating and cooling systems: traditional hydronic heating systems, chilled water systems, and geothermal systems. FEATURES and BENEFITS Low concentration requirements (5 litres or 169 oz. treats 100 litres or 25 U.S. gallons of water.
PAGE 2
DIRECTIONS: Add 1 to 2 bottles (5 to 10 Litres or 1.3 to 2.6 gallons) of AXI-THERM CLEAN 10 for every 100 Litres (25 gallons) of water (Dosage: 5 – 10 %). Use an AXI-THERM “INJET” to add the product to the system. It must circulate for 3 to 30 days when using the existing system circulator. The boiler may be on or off. Once the cleaning operation is finished, the system should be well drained and rinsed. Rinsing should continue until the water runs clear.