User manual

TPOS PRINTER SERIES Set-up Guide
Page 7 / 12
Reference: FDE-3107243 Issue A
3 LOADING PAPER
The Clamshell design allows easy paper loading.
To load paper:
 Open the cover using finger recesses.
 Set the paper roll as indicated on the inside of the cover (see drawing).
 Close the cover leaving a small length of paper out.
 Cut the small length left with the tear bar.
Your paper roll is set.
Notes
:
The paper used should be recommended by AXIOHM.
The paper width must be 58
0/-0.3
mm.
The maximum paper roll diameter is 90 mm.
Warning
: If the paper width should be less than 57.7 mm, it is recommended to check that the printing is
centered according to the paper.
The paper must not be attached to the paper roll spindle.
Roll setting
indications