User manual

TPOS PRINTER SERIES Set-up Guide
Page 4 / 12
Reference: FDE-3107243 Issue A
2 PLUGGING & CONNECTING YOUR PRINTER
2.1 Connecting the power supply
To the printer
To the power
network
The cable to connect the printer to the power network is included in the package.
2.2 Connecting the printer
Connections have to be set at the rear of printer: open the rear-door and set the power supply and interface
cables as shown on the following drawing.
Note
: All connectors should be SELV types in order to safety standards (Safety extra low voltage).
USB LED
USB Connector
RS232
Connector
Power Supply
cable connector
Cash drawer
"Cash drawer
kick out" label