User manual

TPOS PRINTER SERIES Set-up Guide
Page 3 / 12
Reference: FDE-3107243 Issue A
1.3 Printer location
This printer can be used either horizontally or wall mounted (fixing holes on printer bottom for 3 mm
screws, not included).
The external dimensions (W×L×H) are: 121×185×125 mm (with cover closed).
The printer should be set on a stable holder in a place where the following conditions are achieved:
 temperature from 0 to 50°C for operating (-40 to +70 for storage).
 no risk of water exposure.
 no mechanical vibration or stress.
Wall mounting diagram: