Specifications

Operating the Printer 47
Validation Controlled by the Printer
1. The host system sends a validation transaction to the printer.
2. The printer opens the validation clamp, so the form can be inserted. The
READY light flashes green.
READY
light
3. Insert the form into the printer.
Push the form down until it bottoms in the validation slot. Then push the
form all the way to the right until the READY light stops flashing green.
When the READY light stops flashing, the form is properly positioned, and
the printer clamps the form automatically.
4. The printer prints on the form.
When printing is complete, the host releases the form.
5. Remove the form.