Specifications

46 Series 150 Operator’s Guide
PRINTING ON FORMS OR SLIPS
The Model 153 Printer can print on inserted forms. Inserting the form in the top
of the printer, generally referred to as validation, allows up to 15 lines of print
on a form.
VALIDATING A FORM
Forms can be validated with either a single line or multiple lines of
information. Depending on the host system and software used, either the host
system or the printer controls the procedure. In most cases, the only difference
is whether you are prompted by the host system or the printer.
Validation Controlled by the Host System
When the host system controls the validation procedure, it opens the area on
the printer where forms are inserted.
1. The host system indicates that a form is to be inserted for validation.
2. Insert the form into the printer.
3. The host system closes the validation clamp and prints on the form.
4. When printing is complete, the host system releases the form.
5. Remove the form.