Specifications

Setting Up the Printer 25
CONNECTING THE POWER CORD
Caution: The printer must be grounded through the three-prong
power connector. Do not use a ground-defeating adapter.
Powe
r
Switch
On Off
Back of
Printer
1. Turn off the power switch.
Back of
Printer
Power
Cord
2. Connect the power cord to the power socket located on the back of the
printer and the external AC power source.
The power cord is in the supplies envelope.
3. Turn on the printer. The READY light turns green indicating the printer
is functioning.
Note: The printer takes about 1.5 seconds to begin operation.