Specifications

24 Series 150 Operator’s Guide
Note: It is important to fit the front edge of the ribbon cassette into
the carriage first. Do not place the ribbon cassette flat on the
carriage.
Ribbon
Cassette
Clamp
Carriage
Tab
Print head
3. Rock the ribbon cassette forward, toward the print head, and then press
down on it until the tabs on the cassette snap into the clamps on the
carriage.
4. Tighten the ribbon by turning the knob on the cassette clockwise.
5. Close the cassette cover.
6. Turn the printer back on (if already installed).
If you are setting up the printer, go to the next section.