Specifications

Setting Up the Printer 17
Note: Be sure to save the box and packing materials in case you
need to send the printer in for service.
1. Before removing the printer, examine the outside of the box for signs of
damage.
If any damage has occurred to the box, carefully examine the printer and
accessories before setting up the printer. Report all evidence of damage
or abuse to your dealer and shipper.
2. Open the box and remove the papers and supplies envelope.
3. Carefully lift the printer out of the box, and set it on a sturdy, flat
surface.
4. Separate the printer from the packing material. Take the printer out of the
plastic bag.
Simply reverse these steps if you need to repack the printer to send in for
service. (You will not need to repack the supplies).
5. Check the printer for any signs of damage.
If the printer or any parts are damaged, report this to your dealer and
shipper immediately.