Specifications

ASTRIUM Set-Up Guide 9/14 Reference :3108332 - Issue Z
Powering on the printer
n Ensure that the printer’s external power supply unit is attached to an easily accessible electrical power
outlet.
n Press the ON/OFF button on the operating console.
NOTE: Under normal operating conditions only the green power (ON/OFF) LED should be on when the
printer is powered on. Therefore if the LED on the operating console indicate a different machine status,
refer to the troubleshooting section for the related corrective actions.
Button Functions and LED States
BUTTON/
LED
DESCRIPTION
ON/OFF
( )
q Press once to power on the printer.
q With the printer powered on, press for more than
2 seconds to power it off.
OPEN
q Press to unlock the printer cover so that it can be
opened.
FEED ( )
q Press once to advance the paper one line feed.
q Press and hold down to feed the paper
continuously.
ON ( )
q When off: Printer powered off.
q When on green: Printer powered on.
q When flashing green: Thermal printhead
overheated, printer busy.
ERR ( )
q When off: Printer in normal operating
conditions.
q When on red: Paper jam, cutter locked, printer
failure.
ROLL ( )
q When off: Printer loaded with paper.
q When on yellow: Printer almost out of paper.
q When flashing yellow: Printer out of paper.
PDF created with pdfFactory trial version www.pdffactory.com