Specifications

ASTRIUM Set-Up Guide 6/14 Reference :3108332 - Issue Z
Connecting the power supply and interface on ASTRIUM
n Unpack the printer and all its components. Open the printer cover by pressing the Open button on the
operating console as far as it goes (until hearing a click sound indicating that the button is locked in a
pressed position) and then remove the piece of cardboard protecting the print head.
n Position the printer vertically and then open and remove the rear connectors’ cover by releasing its
snap hook, using a screwdriver, and lifting it off. Plug the interface cables into the related connectors on
the printer and then route the cables through the cable blocks (A) to prevent accidental disconnections.
Tighten the securing screws, if present, of the interface cable connectors.
A
Drawer
Display
(if available)
n Plug the power cord of the external power supply unit into printer power jack (B). Attach one end of
the power cord, provided with the printer, into the related connector (C) on the external power supply
unit.
B
C
PDF created with pdfFactory trial version www.pdffactory.com