Specifications

ASTRIUM Set-Up Guide 11/14 Reference :3108332 - Issue Z
SELF TEST TICKET DESCRIPTION
To print the Self-Test follow one of the two procedures indicated below:
Procedure 1: Switch the printer to the Printer Configuration Menu by following the instructions provided
in section 4.1.2 in the user manual; pressing the [FEED] button switches the printer to the
Self-test mode and then to the online mode.
Procedure 2: With the printer powered off and unplugged from the electrical outlet, plug the
printer’s power cord back into the electrical outlet while holding down the [ON/OFF] button.
To perform Self-Test again, start the procedure from the beginning.
In the Self Test mode the following information is printed: the firmware release, the Setup parameters (with
the type of interface board installed) and the selected code page. Provided below is a Self-test printout
example.
Setup parameters and related
values
Code page
Firmware release
PDF created with pdfFactory trial version www.pdffactory.com