User manual

APOS KANJI User Manual Page 5 / 45
Ref : 3103039-FDE Issue A
2. SPECIFICATIONS
2.1. Physical Specification
2.1.1. Dimensions
Height 115mm
Width 170mm
Depth 205mm
Weight (with cutter) 1390 g
2.1.2. Printhead Specification
The APOS printer uses a fixed-head thermal printhead, designed and manufactured by Axiohm
using proprietary thick-film techniques to ensure the highest performance.
Printhead Type: Thermal Line
Printing width: 72 mm
Number of dots across width: 576
Resolution (dot-density): 8 dots / mm
2.1.3. Power Supply
The printer requires a power supply of 24V at 2A minimum. Other voltages which are required
internally for the micro controller and the communications ports are generated internally from the
24V supply.
Specification:
Output Voltage: 24 VDC (no load)
Output current: 2.0 A mean continuously
10 A peak during 4ms max (pulse cycle =30ms)
2.2. Environmental Specification
2.2.1. Environmental Conditions
Operating Temperature: 0°C - +50°C
Storage Temperature: -40°C - +70°C
Maximum Humidity: 90% RH (non-condensing)
2.2.2. EMI,ESD and XXX
The printer is designed to meet the requirements of:
EN55022 class A
FCC class A.
EN50082-1
ANSI/UL1950
EN60950
CAN/CSA C22.2 No 950