User manual

APOS KANJI User Manual Page 39 / 45
Ref : 3103039-FDE Issue A
4.1.48. FS !
(Description) Specifies Kanji print mode
(Format) <1Ch> <21h> <n>
(Comments) 0 <= n <= 255
The value of n can be set to vary the mode of print according to the table
below.
Default value is n = 0
Bit Function Bit = 0 Bit = 1
0 (not used) - -
1 (not used) - -
2 Double height Cancelled Set
3 Double width Cancelled Set
4 (not used) - -
5 (not used) - -
6 (not used) - -
7 Underlined Cancelled Set
4.1.49. FS &
(Description) Specifies Kanji mode
(Format) <1Ch> <26h>
(Comments) Valid if self test detects the special added Kanji board which means :
KANJI SET = ON
(Cross référence)
4.1.50. FS -
(Description) Specifies Kanji underlined mode
(Format) <1Ch> <2Dh> <n>
(Comments) 0<= n<= 2
(Cross référence)
n Function
0 cancels underlined Kanji
1 1 dot underlined Kanji
2 2 dots underlined Kanji