User manual

APOS KANJI User Manual Page 35 / 45
Ref : 3103039-FDE Issue A
4.1.39. ESC p
(Description) Generate solenoid pulse
(Format) <1Bh> <70h> <m> <n1> <n2>
(Comments) Generates a pulse on pin m of the drawer kickout connector in accordance
with the table below.
n1 x 2 ms is the on-time of the pulse.
n2 x 2 ms is the off-time of the pulse.
0<= n1 <= n2 <= 255
(Cross référence) –
m Connector Pin
0 1 2
1 1 5
2 2 2
3 2 5
4.1.40. ESC u
(Description) Transmit cash drawer status
(Format) <1Bh> <75h> <n>
(Comments) To request status of drawer 1, set n=0
To request status of drawer 2, set n=1
0 <= n <= 1
The printer returns a single byte. If the return byte is o (zero) the drawer is
closed. If the return byte is non-zero, the drawer is open.
This command is ignored if the printer is fitted with a Centronics interface
because Centronics is not bi-directional.
(Cross reference) –