User manual

APOS KANJI User Manual Page 24 / 45

Ref : 3103039-FDE Issue A

4.1.11. ESC SP

(Description) Set spacing to right of characters

(Format) <1Bh> <20h> <n>

(Comments) 0 <= n <= 32, where n is specified in 1/8 mm units

Default value is n=0

If double-width mode is selected, the amount of space is doubled.

(Cross reference) –

4.1.12. ESC !

(Description) Set print mode

(Format) <1Bh> <21h> <n>

(Comments) 0 <= n <= 255

The value of n can be set to vary the mode of print according to the table

below.

Default value is n = 0 (ie. Font A in standard mode)

(Cross reference) –

Bit Function Bit = 0 Bit = 1

0 Character Font A B

1 (not used) - -

2 (not used) - -

3 Emphasised Cancelled Set

4 Double height Cancelled Set

5 Double width Cancelled Set

6 (not used) - -

7 Underlined Cancelled Set

Front Front Selected

12 × 24

9 × 17