User manual

APOS KANJI User Manual Page 20 / 45
Ref : 3103039-FDE Issue A
4.1.1. ESC =
(Description) Select device
(Format) <1Bh> <3Dh> <n>
(Comments) It allows the user to select a printer.
If n = 0 all the printers are deselected.
If n = 1 to 32, the printer with address #n s selected, all the other printers are
deselected.
If n = 33 all the printers are selected.
The default value is n =1
(Cross reference) –
4.1.2. AX P
(Description) Adjust print density
(Format) <1Fh> <50h> <n>
(Comments) This command allows the user to vary the print density by adjusting the
heating time between -32% and +10% of the nominal setting in 0.25% steps.
The percentage variation ∆% is given by
∆% = (n - 128) / 4
0 <= n <= 168
(Cross reference) –